Fire-resistant silicone membrane roofing membrane heat-resistant insulating rubber

Glossy HDPE geomembrane is a geomembrane product with a smooth surface on both sides. It is made of high quality high density polyethylene material, which is made of a combination of about 97.5% polyethylene, 2.5% carbon black, a trace amount of antioxidant and heat stabilizer. The resin used in the production process is special

Featured Products

Glossy HDPE geomembrane is a geomembrane product with a smooth surface on both sides. It is made of high quality high density polyethylene material, which is made of a combination of about 97.5% polyethylene, 2.5% carbon black, a trace amount of antioxidant and heat stabilizer. The resin used in the production process is specially designed for geomembrane. Applied raw polyethylene resin raw materials.

The single-faced HDPE geomembrane is a geomembrane product that forms a matte surface by nitrogen pressure jetting on the basis of a glossy geomembrane. This process is the only way to produce a matte geomembrane without significantly reducing any of its physical properties. The geomembrane product is made of high quality high density polyethylene material, which is made of a combination of about 97.5% polyethylene, 2.5% carbon black, a trace amount of antioxidant and heat stabilizer. The resin used in the production process is designed for The raw polyethylene resin raw material actually prepared by the geomembrane application.

Thickness:0.25mm -- 3mm
Width:2m -- 9mm

Feature:
1)Good physical and mechanic performance
2)High tearing resistance, strong deformation adaptability
3)Puncture-resisting, aging resisting, ultra-violet radiation, oil and salt, and corrosion resistance
4)Good adaptability to high and low temperature, non-toxicity, long service life
5)Good waterproof, drainage, anti-seepage and damp proof effects
6)Complete width and thickness specifications, low cost and easy installation.
Application: 
1.landfill,sewage or control the waste residue seashores seepage.
2.Lake dam,tailings dams,sewage dam and reservoir,channel,storage of liquid pools(pit,ore)
3.The subway ,tunnel,anti-seepage lining of basement and tunnel.
4.To control the roadbed and other foundation saline seepage.
5.Dike,the front of the sam foundation seepage prevention bedding,level of vertical impervious layer , construction cofferdam,waste field.
6.Seawater,freshwater fish farms.
7.Highway,the foundations of the highway and railway;the expansive soil and collapsible loess of the waterproof layer.
8.Anti-seepage of roofing
 
No.indextest value
0.75mm1.00mm1.25mm1.50mm2.00mm2.50mm3.00mm
1Minimum density(g/cm²)0.93
2Yield Strength,N/min11151822293744
Breaking strength,N/min20273340536780
Yield elongation ratio12
Breaking elongation ratio700
3Right angle tear strength,N93125156187249311374
4Piercing strength,N240320400480640800960
5Resistant to environmental stress cracking,hr300
6Carbon black       
Carbon black content,%2.0-3.0
Carbon black dispersionNine of the ten observation areas should belong to Stage 1 or Stage 2, and Stage 3 should not be more than one.
7Oxidation induction time       
Standard OIT,(min)100
High pressure OIT,(min)400
885 baking aging(Min average) 
After baking 90d,Standard OIT %55
Baking 90d,High pressure OIT %80
9UV resistance 
Ultraviolet radiation 1600h,50
Standard OIT %
Ultraviolet radiation 1600h,50
High pressure OIT %
10-70 Low temperature shock enchantment performancePass through
11Water vapor permeability coefficient≤1.0*10-13
12Dimensional stability±2


Fire Resistant Silicone Membrane Roof Rolls Heat Resistant Insulation Rubber

Fire Resistant Silicone Membrane Roof Rolls Heat Resistant Insulation Rubber
Fire Resistant Silicone Membrane Roof Rolls Heat Resistant Insulation Rubber





Fire Resistant Silicone Membrane Roof Rolls Heat Resistant Insulation Rubber

Storage and Transportation:
  1) Waterproof materials should be stored under dry and ventilated conditions.
  2) Different types of membranes must be piled separately.
  3) Under usual condition, storage period is one year since production date.
  4) Waterproof materials should be put vertically during transportation.
  5)  It should be kept away from sunshine and rainwater.
  6) Transport and storage process should be away from the fire source, storage temperature does not exceed 40 ºC, the storage period is 1 year.



Fire Resistant Silicone Membrane Roof Rolls Heat Resistant Insulation Rubber



Certificates:
Fire Resistant Silicone Membrane Roof Rolls Heat Resistant Insulation Rubber


Trade Shows:


Fire Resistant Silicone Membrane Roof Rolls Heat Resistant Insulation Rubber

FAQ:
Q1:How to get the sample?
A :We can provide you free samples for quality inspection.

Q2:What's are the MOQ?
A :The MOQ is 500 square meters usually.Also we can according to your condition to set the MOQ.

Q3:How about the delivery time?
A :Delivery time about 7days after your deposit or L/C at sight.

Q4:Can we visit your factory to inspect the goods for the order?
A :Welcome to visit our factory to inspect the quality.We sincerely hope to establish a  honest business relationship.

 


Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours